Microcement Sample Plates (Dimensions: 10x10cm)
Up to 48 sample plates of your choice. Ideal for seeing, touching and experiencing!
Instructions for Use
- The substrate must be stable, dry, and free of dirt, separating agents, and coarse unevenness.
- Sand off any unevenness.
- For tiled surfaces, we recommend priming the tiles with our 2K PRIMER for non-absorbent substrates and filling the joints with it.
- Allow the primer to dry.
Main Coating
- Mix microcement A components in medium grain size with the B component in the specified mixing ratio.
- Add WB pigment in the recommended quantity to colour the material.
- Spread the material with a trowel and then leave to dry
- Sand off any unevenness in the surface greater than 3 mm and vacuum up any sanding dust.
- Apply a second coat in the same way.
Sealant
Note: For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX polyurethane resin (PU resin) in matt or glossy.
- Mix PU resin and hardener in the specified mixing ratio and pour into a paint tray.
- Apply the material thinly with a foam roller in a crosswise motion and allow to harden. We recommend two coats.
Customer Service:
If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
Danger: Contains: PORTLAND CEMENT CLINKER Causes serious eye damage Causes skin irritation. May cause respiratory irritation. May cause an allergic skin reaction. Keep out of reach of children. Avoid breathing dust. Wear protective gloves/ protective clothing / eye protection / face protection IF ON SKIN: Wash with plenty of water and soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a POISON CENTER or doctor If skin irritation or rash occurs: Get medical advice / attention. Take off contaminated clothing and wash it before reuse Dispose of contents/container to in accordance with local/regional/international regulations. Use only outdoors or in a well-ventilated area.
A-Components (Microcement Fine) Danger: Contains: PORTLAND CEMENT CLINKER Causes serious eye damage Causes skin irritation. May cause respiratory irritation. May cause an allergic skin reaction. Keep out of reach of children. Avoid breathing dust. Wear protective gloves/ protective clothing / eye protection / face protection IF ON SKIN: Wash with plenty of water and soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a POISON CENTER or doctor If skin irritation or rash occurs: Get medical advice / attention. Take off contaminated clothing and wash it before reuse Dispose of contents/container to in accordance with local/regional/international regulations. Use only outdoors or in a well-ventilated area.
Reviews
Related Products
Microcement set for bathrooms, showers, and wet areas incl. PU sealant matt
Microcement in premium quality for bathrooms and wet areas of all kinds for indoor and outdoor use
1K CONCRETE EFFECT for Concrete Design
Decorative levelling compound with concrete optic. Cost-effective alternative to microcement. Ideal for rented flats as it is easy to sand and paint over afterwards.
Microcement set for floors
Microcement of premium quality for floor surfaces of all kinds indoors and outdoors. Living areas, commercial spaces, stairs, and more.
