2K Polyurethane Resin for Surface Coatings

You check the size of the surface and which layer thickness you want to apply. We recommend two thin coats with a layer thickness of approx. 0.15mm per coat (i.e., max.150µm per coat). Conveniently select the required squareness within our product page. The corresponding amount of material for two coats will be displayed automatically. At EPODEX you can get water-based PU-resin in glossy and matt. The processing of our PU resins does not differ from that of water-based epoxy resin or other water-based products. You simply roll the product on with a paint roller, brush it on or spray it on.

For example, install an epoxy floor and use polyurethane resin as the final sealer. In this way, you combine the best properties of the different synthetic resins and get a perfect result at a favourable price.

Start by cleaning your surface thoroughly. Remove stains, dirt and dust. Fill in holes and unevenness. This will create a clean and smooth surface that will guarantee you a perfect result. Then mask off the edges and any parts that are not to be coated. Should you not want a transparent coating, we recommend that you begin with a thin layer of coloured primer between 0.2mm and 0.3mm. Use our PRIMER for this. To apply, use a roller and paint crosswise to close all pores. Allow the primer to dry. The primer seals the surface and ensures that not too much polyurethane resin is absorbed into the substrate. This saves you material and money!

After the drying time, you can apply the polyurethane resin. To do this, mix the PU resin supplied with the corresponding PU hardener in the mixing ratio specified. If desired, you can also dye the mixture with our WB pigments. Now apply the material with a roller. For perfect processing and a top result, please always observe the recommended room temperature.

Nach der Trocknungszeit können Sie das Polyurethanharz auftragen. Mischen Sie hierzu das mitgelieferte PU-Harz mit dem dazugehörigen PU-Härter im angegebenen Mischungsverhältnis zusammen. Falls gewünscht, können Sie die Mischung zusätzlich mit unseren WB-Farbpasten einfärben. Rollen Sie das Material nun mit einer Schaumwalze auf. Für eine perfekte Verarbeitung und ein Top-Ergebnis, beachten Sie bitte immer die empfohlene Raumtemperatur.