Microcement set for bathrooms, showers, and wet areas incl. PU sealant matt

1. The substrate must be stable, dry, and free of dirt, separating agents, and coarse unevenness.
2. Sand off any unevenness.
3. Apply Primer:
   • For wall tiles, we recommend priming the tiles and joints with our special primer & putty and filling the joints with it.
   • For floor tiles, we recommend priming the tiles and joints with our special 2K levelling compound and filling the joints with it.
   • For walls and floors without tiles, we recommend using our Deep Primer
   All primers can be found under the Accessories button on this product page.
4. Allow the primer to dry.

1. Mix microcement A components in medium grain size with the B component in the specified mixing ratio.
2. Add WB pigment in the recommended quantity to colour the material.
3. Spread the material with a trowel and then leave to dry
4. Sand off any unevenness in the surface greater than 3 mm and vacuum up any sanding dust.
5. Apply a second coat in the same way. Depending on the desired finish, the microcement can be applied in medium or fine grit.
Application of microcement for walls: Layer 1 (medium grain size): 1.2kg/m², Layer 2 (medium grain size): 1.2kg/m²Application of microcement for floor: Layer 1 (large grain size): 1.6kg/m², layer 2 (medium grain size): 1.2kg/m

Note: For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX polyurethane resin (PU resin).

1. Mix PU resin and hardener in the specified mixing ratio and pour into a paint tray.
2. Apply the material thinly with a foam roller in a crosswise motion and allow to harden. We recommend two coats.

If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.