CONCRETE PAINT 1K | All Colours
- Can be used on all surfaces such as concrete, screed, wood and more
- Note: For heavily stressed wall and floor , as well as surfaces with permanent water contact, we recommend our waterproof Concrete Paint 2K.
- Properties: low odour, abrasion-resistant, UV-resistant, high coverage
- Consumption: 100-130g/m²
- Application instructions can be found on this product page
1. Select colour
2. Select quantity (m²) for 1 coat
Accessories kit (9 items) (Optional): 
Accessories kit (9 items)
- 1x Flat Brush 2,5cm
- 1x Flat Brush 7,5cm
- 1x Sanding Block
- 2x Sandpaper P180
- 1x Paint Tray 16cmx30cm
- 1x Exchangeable insert for paint tray 16x30cm
- 1x Stir Stick
- 1x Masking Tape 3cmx50m
EPODEX - CONCRETE PAINT 1K
CONCRETE PAINT 1K is abrasion and weather-resistant. It is odourless and water-based. It is suitable for indoor and outdoor use on any surface without standing water. We recommend our ultra-resistant epoxy resin-based CONCRETE PAINT 2K for floors subject to heavy wear and tear such as garages, parking lots, industrial floors and/or floors with standing water. CONCRETE PAINT 1K can be used as:
- Flooring Paint
- Flooring Sealant
- Wall Paint
- Concrete Paint
- Cement Paint
- Screed Paint
- Plaster Paint
- Stone Paint
100-130g/m² per coat on smooth, non-porous substrates. Depending on the substrate, 1 kg of paint should be sufficient to paint one coat on approx. 10m². We recommend applying ca. 2 coats. We recommend applying a suitable primer (e.g., undercoat) on very porous substrates to minimize the absorption of CONCRETE PAINT.
Instructions for Use
- The temperature of the room, the substrate and the paint must be at least +15°C.
- Make sure that the substrate is clean and free of grease. To do so, we recommend using EPODEX PRE-CLEANER.
- The substrate should be clean, dry, and free of any substance that may prevent the paint's adhesion.
- We recommend applying a suitable primer on very porous substrates (e.g., paint undercoat).
- Mix well before use.
- Apply a coat of paint with a foam roller and let it dry (approx. 8 hours at 20°C).
- Apply several coats until you achieve the desired result. We recommend applying at least 2 coats of paint.
Processing temperature: The room and substrate temperature must be at least 8°C. Do not apply on heated surfaces and in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, dilute the paint with up to 5% water. Clean all accessories with water immediately after use. EU limit value: (Cat. A/d): 140g/L (2010), max. 30g/L VOC
Customer Service:
If you have further questions, please contact us by phone, e-mail or use our WhatsApp support. Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fumes/gas/mist/vapours/spray. Do not get in the eyes, on skin, or clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container in accordance with local/regional/international regulations.
Reviews
Related Products
TILE PAINT 2K | All Colours
For heavily used wall and floor tiles as well as tiles with permanent water contact.
CONCRETE PAINT 2K | All Colours
Floor sealant/ floor paint for living space, garage, cellar, warehouse and industrial hall
