TILE PAINT 2K gyanta (keményítő nélkül)

1. Sand the substrate to improve the paint adhesion. To do so, use EPODEX sandpaper.
2. Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
3. Mix the resin A-komponent with the hardener B-komponent in a ratio of 5:1 (e.g., 5kg resin: 1kg hardener).
4. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-komponent and hardener B-komponent are completely mixed together.
5. Mix the clear paint with our water-based colour paste WB PIGMENT to tint it. Recommended amount of paste to be added: Add 5% in weight to the paint. (e.g. 300g colour for 6kg TILE PAINT 2K)
6. Apply a coat of paint with a brush or foam roller and let the it dry (approx. 8h at 20°C). (Pot Life/Processing Time: at 20°C: approx. 50 minutes, at 25°C: approx. 35 minutes)
7. Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.
8. As an option, tile joints can be re-done with our practical EPODEX grouting pen.

Recommendations: Processing temperature: The room and substrate temperatures must be between 8°C and 25°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. Clean tools with water immediately after use.

EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC

Pokud máte další dotazy, obraťte se na nás telefonicky, e-mailem nebo využijte naši podporu prostřednictvím WhatsApp.

Poznámka: Všimněte si, že kvůli různým světelným podmínkám a monitorům se barvy nemusí jednotně zobrazovat.

A-komponent: Pozor: 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Reaction mass of 2,2’-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({ 2-[4-(oxiran-2ylmethoxy)benzyl]phenoxy} methyl)oxirane and [2,2’-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane Oxirane, mono((C12-14-alkyloxy)methyl)derivs.

Danger Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Toxic to aquatic life with long-lasting effects. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents and container in accordance with all local, regional, national or international regulations.